How To Install Eachine ProDVR Into Your DIY FPV Goggles

hello everybody this is the review of the eachine ProDVR
We while be showing you how to use all the wires to connect it
and show you which cables you need to make to connect it with your FPV Goggles
here we have the eachine DVR and hire we got all the different cables
this first cable is for Vide and Audio out that go's on the top connector
the original cable that comes's with a JST plug and a Servo connecor
the JST plug is for your 5v Power supply make sure it's 5v or you create magic smoke
and the servo connector is for your video and audio in
this is the second cable ready made for you that we while be using in this review
you can also make all the cables custom that's your option
the last and third connection is meant for using with your FC Flight Controller
the first method is very easy and uses just the video in and out cable from the DVR
we just have to make a simple servo connector to a female video plug
the second method we are only going to be using video in and split that up into two different cables
using a male & female video Plug and solder it to a servo connector
we solder those together now it's just a Question of preheating shrink
we shrink the two wires together that we are going to solder to the servo Connector
we are using the first cable we made and connect that to the video out from the video receiver
that we connect to the Eachine proDVR now you can also see why I added a little bit extra yellow heat shrink to make it easier to connect
that's going to the Video in where the DVR do his thing and we can press record
and the DVR while send it out to the Screen this is video out
now it's just a Question of supplying everything with power
this is the power to Video Receiver and screen + 5 volts to your DVR
we already put an SD Card in that is completely empty
now we are supplying power to the Live FPV Camera... and it works
we have a perfect screen we got recording time and some other symbols
a long press on the first button starts recording
another long press and it stops recording
and works perfectly fine for me we have the camera hire and we have a nice screen that looks really good
that was method number one and now we are going to be using the second method
so we can remove the video out this second method is the most common one used
this time we connect the second custom cable we made and connect it to the DVR video in
and one side we also having the video from the receiver going into the DVR and at the same time it's going to the DVR it's also going to send it to the screen
let's hook everything back up and give it some power
we have screen DVR no let's supply that with power
that going on the light is blinking only we are missing the signals the timer the OSD
But it must work the same with a long press and the light start flashing that means it's recording you just can't see it
off and that it all you have to know to connect your DVR with your FPV Goggles ore Screen and seen it work
hope you really like this video because lot's of people are not showing you how to make this two custom cables and connect it all together to make it work
now you have seen it work and hope you give it lot's of Like & Subscribe Give it lot's of thumbs up
hope to see ya next week again this is happy flyer wishing you happy flying

How To Install Eachine ProDVR Into Your DIY FPV Goggles

Latest Posts