SRS GT AM - SIMRACERSTORE

hi, i hope you are well, today i present you the second part of the simracerstore rig
i finished the installation of the rig
i modified the rig compared to the part 1
i moved the mouse support to the left because i did not have much space with the shifter and the handbrake
i brought closer the button box
i will go back on a point, my dbox motion because i was asked the question
why my front dbox are in the middle?
simply because i find that i have a better feeling in the rig with closer motions
if i had been able to bring them closer i would have done but with the weight of the support and pedals in front, i am at the maximum
my first rig, i had a space between the motions of 50cm
at present, i have a gap of 65cm between the motions, i therefore lose 15cm on the width
and on the length, i am about 1m of gap between the motions
i changed my settings on the motions
i accentuated the effects because with the weight of the rig and the spacing of the motions, i had lost feeling
i spent time to settle again but i managed to regain my feeling, it is perfect
i let you watch a small video on the equipment that equips the rig
we find ourselves in the stands of the spa francorchamps with the porsche 911 CUP on iracing, right away
i am in the stands of SPA francorchamps, i will go on racing with the 911 GT3 cup,
i test the rig of SIMRACERSTORE and i make an conclusion, let's go!!
i have my new gloves, they are great! PUMA is very good
we leave for a few laps, let's go
i mounted the rig in about 2 days
i recevied my installation instructions by e-mail
the installation instructions is detailed, step by step
i had some questions for sis since i am equipped with box motion
i contacted simracerstore by Facebook and they reply quickly, it is very good
the rig is completely different from the rig i had before
the rig is heavier,it weights 80-100kgs with the material above
DEM pedals weights 11kgs, the direct drive is heavy also, it makes weight
the rig alone weighs 60-70kgs
the SRS GT PRO rig with integrated triple screen support weighs 100kgs
we have very good material
it is very good rig , i have a good feeling in the seat
as i said , i have regulated again my dbox
very good
the rig is customizable
on the plates, you can engrave your logo, team name or pseudo to the choice
just send your logo or name to simracerstore in PDF format
then they engrave on the plates
laser engraved, very clean
i modified my rig compared to the part 1
i brought closer the button box
i put the mouse support on the left
i did not have enough space with the shifter and the handbrake, i preferred to modify
i have very good feeling
i put strength in the direct drive, you can see it on the bar of the ffb
and the steering wheel support does not move
no squeaking, very good
the support is very stable
if you have any questions,you can post them in the comment area, i would be happy to reply
or you can contact simracerstore by e-mail or Facebook
no worry
i installed my gauge support right and i think it's nice, it fits well with the dashboard
i thought a lot but i'm happy with the result
we can evolve the rig, i put a lot of options
it is very well equipped basic
i put options because i have a big shifter, hydraulic handbrake and button box
i think to evolve the rig with a dashboard or Frex simwind (ventilation system)
i'll see later
very good rig
i'm not put the box of the direct driven the support of the rig. i was afraid with electronics and vibrations, so i installed the box next to the rig
the screen support is independent
it is not moving with the rig
the pedal support does not move
i was asked the question because the pedal support is 3mm thick , but with a pedal set of 11kgs, the support does not move
very good
i added a footrest
the keyboard support is mobile
it's good,it can push it into game
and bring it closer when it is needed
honestly, it is very good rig
there are many brands and it is very hard to decide
but on aluminum rig like this,we can buy the closed eyes
we can make it evolve
if you buy a bigger shifter or a button box for example, you can make the rig evolve easily
i finish the lap and i make an conclusion
very good, i am glad
i finished the rig test
the positive points are: easy assembly, strength ( the steering wheel support and the pedal support do not move, very good)
the choice of colors on the plates
personalization plates, you can put your logo,pseudo,...
the negative point is: the pc support ( i think that with a complete plate, it would be simpler to install a box or pc rather than squares, but it may be an idea forsimracerstore for the next
i thank stephane of simracerstore for helping me to realize this rig, i had sent my button box to see how to install it,thanks
there is a 50E discount with the code FLOEB on the website of simracerstore for the purchase of a GT AM rig + support triple screen or for the purchase of a GT PRO rig
subscribe to my youtube channel
like my Facebook page
and i give you appointments for a next review BYE

SRS GT AM - SIMRACERSTORE - Review part 2

Latest Posts