
Today, we have a special treat for a lot of you guys like myself who like to go off-roading.
Today, we have this 2010 Toyota FourRunner and the owner of it, who is actually our photographer,
decided this weekend that he was going to head up to Mammoth and on his way, he got
stopped by a little lake over on Crowley and this is where he got his car completely thrashed
with mud, dirt, debris- all that good stuff.
Check out the footage of that because this car got completely thrashed.
Now, he brought it in today because he wants to get rid of all that stuff but he wants
to enhance the shine.
As you can see, it's got a lot of caked on mud on the grill, body, wheels and we are
going to show you the most effective way to remove all that and enhance that shine.
So, today I am going to be introducing you guys to one of our brand new kits.
This is our TORQ Snow Foam Blaster R1.
This kit comes with a brand new bucket, you're going to get a red Dirt Trap, this TORQ Snow
Foamer R1 Foam Gun and Tough Mudder.
This is the best way to get your car looking its best if you like to go off-roading in
your truck, Jeep, ATV, UTV, and all this is really going to help bring out the shine in
your vehicle without damaging the finish.
So, to begin, we are going to place a Dirt Trap in each one of our buckets.
By now, you guys should have at least one bucket with a Dirt Trap and today, we are
going to be using this green Dirt Trap in our rinse bucket and for the wash bucket,
we are going to be showing you guys the actual kit with a red Dirt Trap.
We are going to place one in each bucket and what the Dirt Trap actually does if you are
not familiar with it is it actually filters our the abrasive particles of mud, clay, dirt,
bird droppings, or anything else that could scratch the finish and it's going to keep
it underneath that platform so it you're not bringing it back onto the vehicle.
Like I said, we are going to be using Tough Mudder.
We can place 1-3 ounces into our wash bucket.
Simply squirt in there and that's about 1.5 ounces and while we are at it, let's go ahead
and add some soap to our foam blaster.
What's great about this is you guys can actually foam your vehicles no matter what size, shape,
what kind of vehicle without the use of a pressure washer.
This attaches directly to your garden hose.
You can use your favorite shampoo in there to enhance that shine, but more importantly,
use those great thick suds which reduce the chance of damaging the finish.
Now, we'll simply reattach the top and instead of shaking it up violently creating foam inside
of the canister, what we're going to do is mix it back and forth gently, mixing the solution
together, this way it properly aerates as we're foaming.
So, now that this is properly mixed together, we are going to move on to the actual detailing
process, but in most cases you are going to want to start with the dirtiest area and that's
always going to be the wheels.
Wheels pick up road debris, old dressings, brake dust- all that collects on the surface, giving
it a brown effect and also if left to sit there, will also deteriorate the finish on
your wheels.
So, what we are going to be using today is some Diablo wheel Gel.This has been diluted
3 to 1 to help us properly aerate but also encapsulate and emulsify any abrasive particles
of brake dust and anything else that's sitting on the surface.
So, we are going to begin by rinsing it down, spraying it, brush it, and then we can move
onto the body.
So, let's get started.
So, there you go guys.
You can see that Tough Mudder produces a lot of suds which helps add lubrication when you're
washing to prevent any scratches and swirls and what it's also doing is enhancing that
shine on any color vehicle.
So, now, what we are going to do is activate the suds that are in our wash bucket.
Simply disconnect the foam sprayer of the actual R1 foam gun.
What's that's doing is it's enhancing the lubrication as we're washing.
It's going to prevent any scratches or swirls that we pick up from our wash mitt.
We're also going to be using our Big MoFo because this is a large vehicle and we want
to cover a large surface area.
Now, today it's not very hot.
It's actually pretty windy so we are going to work quickly to prevent any kind of water
spots or drying.
Right now, we are just going to grasp some suds onto the Chenille Microfiber Wash Mitt,
and then go the highest point and work our way around the vehicle in straight lines to
prevent any kind of swirls.
Now, as you saw, after rinsing and foaming, the mud that was sitting on the vehicle is
still stuck on the vehicle so it's going to take a little bit of scrubbing.
A lot of you guys that go off-roading like to do a touchless wash, but in the case of
this car that has a lot of build up of clay and mud, you actually need to get in there
with a wash mitt and scrub away that filth and contamination.
Well guys that pretty much does it for today.
We're obviously going to finish it off by rinsing it down to knock off that loose dirt
and also spent soap and then we are going to dry it to prevent any kind of water spots.
In the meantime, you guys can head over to our website chemicalguys.com to check out
these products for yourself.
If you like going offroad or if you like this FourRunner, make sure to give it a thumbs up and
we will see you next time right here in the Detail Garage.
How To Clean and Seal Glass! - Chemical Guys How To Treat Really Deep Scratches! - Nissan Armada - Chemical Guys How To Polish Black Paint With REALLY Bad Swirls! - K.I.T.T. Knight Rider - Chemical Guys How To Polish: Hand vs. Machine Polish! - Chemical Guys How To Clean and Protect Leather Car Steering Wheel - Chemical Guys Best Way To Clean Nasty Carpet Stains | Toyota 4Runner - Chemical Guys How to: Polish Hard to Reach Areas on Wheels! - Chemical Guys Detailing "KITT" POV: How To Properly Wash and Dry - Chemical Guys Car Care Eliminate Lingering Odors From Your Car - Chemical Guys Stripper Scent How To Wash Your Car Without A Garage! - No Hose Waterless Car Wash - Chemical Guys